VoSky 9040 Four Port Rack Mounted FXO Exchange

discountsystems | Telephone Systems - System Phones - VoIP UK | VoIP - Gateway - Skype Voice over IP Accessories Power Injectors | VoSkY Exchange | VoSky 9040 Four Port Rack Mounted FXO Exchange

VoSky 9040 Four Port Rack Mounted FXO Exchange
VoSkY Exchange offers a low cost of entry and evolutionary migration path to VoIP. It improves communications between offices, customers and partners and reduces telephony costs thanks to the power of Skype. Plus, it extends the life of current PBX systems and installation is simple. The four port 9040 version connects to a PBX using FXO analogue trunk ports.VoSkY Exchange offers a low cost of entry and evolutionary migration path to VoIP. It improves communications between offices, customers and partners and reduces telephony costs thanks to the power of Skype. Plus, it extends the life of current PBX systems and installation is simple. The four port 9040 version connects to a PBX using FXO analogue trunk ports.

Features

Ports - 4
Connects to a PBX using analogue trunk ports (FXO)
Enhances a customer's existing phone system with a seamless integration with existing PBX
Make and receive Skype calls from any office phone extension
Transfer an incoming PSTN call to any Skype ID Adds Click to call features to a website
Monitors and manages an organisation's internal Skype traffic
Creates a global presence with ease

Specifications

FEATURES DESCRIPTION
Main System Integrated ARGO SE402 (48MHz 16 bits RISC Processors)
USB 1.1 Host Controller (compatible with USB 2.0)
USB Audio Device Class 1.0
USB HID Class 1.0da
Audio: 16-bit mono linear PCM audio in 8 KHz sampling rate
PC Interface 1 USB Port for 9040, 2 USB Ports for 9080, (Type B Connector) for PC connection
Telephone Interface 4 FXS Ports for 9040, 8 FXS Ports for 9080, (RJ11 Modular Jack) for PBX analog FXO trunk connection ports
PBXs Supported Works with most PBXs.
Power Supply Input: 100-240V AC, 50/60HZ
Output: 5V DC, 4.0A
FXS Ports Impedance: 600 Ohm
On-Hook Voltage(standby): 48V DC
Off-Hook Loop Current: 25 mA DC
Ringing Voltage: 130V Peak to Peak, 20/25 Hz/Adaptable, 80% Duty Cycle Square Wave, 60Vrms
REN (Ringer Equivalence Number): 2
Caller ID(FSK, Type I) generation
Interface: 2-wire, loop start
Frequency Response: 200~3400 Hz
Call Progress Detection: ONHOOK, OFFHOOK, DTMF, FLASH
Call Progress Generation: Dial tone/Voice Prompt, Busy Tone, Ring Back Tone, Ringing Cadence, DTMF
Generate "wink" for remote hang up signaling
LEC (Line Echo Cancellation): Supported
Full Duplex Voice Channel: Supported
Inbound/Outbound DTMF Relay
Polarity Reversal Generation Supported
Service Tone Country Support Brazil Mexico
Chile Netherlands
China Taiwan
Columbia Thailand
France United Kingdom
Germany United States
Hong Kong SAR of China Additional countries supported via firmware upgrade
Japan

User Interface Console Application (Show Line Status, Configuration of Region/Voice Prompt/DTMF Dispatch)
Web Speed-Dial Management: add/delete speed dial numbers
Upgrade Automatic Firmware version verification
(Every 24 hours)
Environmental Operating Temperature: 0o C - 55o C
Operating Humidity: 0% - 70%
Storage Temperature: -20o C - 70o C
Storage Humidity: 0% - 95% (Non-Condensing)
Certifications and compliance CE:
FCC:

Physical Specifications Dimensions: 430mm x 150mm x 45mm
Weight: 1500 g/1782 g (4 port/8 port)

Price Ex. VAT: £603.95 (Excluding VAT at 20%)

discountsystems | Telephone Systems - System Phones - VoIP UK | VoIP - Gateway - Skype Voice over IP Accessories Power Injectors | VoSkY Exchange | VoSky 9040 Four Port Rack Mounted FXO Exchange